MAÜ GCRIS Standart veritabanının içerik oluşturulması ve kurulumu Research Ecosystems (https://www.researchecosystems.com) tarafından devam etmektedir. Bu süreçte gördüğünüz verilerde eksikler olabilir.
 

Tear-off Wear Mechanism of Sintered Diamond Tool in Cutting SiC Particle-strengthened Epoxy Composite

Loading...
Thumbnail Image

Date

1997

Journal Title

Journal ISSN

Volume Title

Publisher

Elsevier Science Pub.

Open Access Color

OpenAIRE Downloads

OpenAIRE Views

Research Projects

Organizational Units

Organizational Unit
Department of Machine and Metal Technologies / Makine ve Metal Teknolojileri Bölümü
Makine ve Metal Teknolojileri bölümü öğrenim süresi: 4 yarıyıldan oluşan 2 yıllık bir süreci kapsamaktadır. Bu süre içerisinde öğrenciler teorik derslerle birlikte atölye dersleri de alarak eğitimlerini tamamlamaktadırlar. Almış oldukları derslerin seçimleri özellikle öğrencilerin mezun olduktan sonra işe girme imkanlarını arttırıcı yönde yapılmaktadır. Mesleki eğitim sürecinin sonunda mezunlarımız; iyi derecede teknik resim çizebilen, torna, freze, taşlama gibi konvansiyonel takım tezgahlarını, gelişmiş bilgisayar kontrollü CNC tezgahlarını, Autocad ve SolidWorks gibi çizim programlarını kullanarak makine parçalarının yapımı için gerekli beceriyi ve teknolojik bilgiyi kazanırlar. Ayrıca rahatlıkla iş sahibi olabilmeleri ve işlerinde ilerleyebilmeleri için öğrenim süreci boyunca bulmuş, tasarlamış ve yapmış oldukları projeler ve verdiğimiz görevlerle mezunlarımıza hem girişimcilik ruhunu hem de çözüm odaklı ilerleyebilme yeteneğini kazandırmak da amaçlarımız arasındadır.

Journal Issue

Events

Abstract

This study concerns the wear of sintered diamond tools in the cutting of SiC-particle–epoxy composites. The effects of the SiC particle size, volume ratio in the composite and diamond grain size of the cutting tool on tool wear were investigated. The experimental work has shown that a coarse-grained diamond tool exhibits higher wear resistance than a corresponding fine-grained tool. Greater tool wear was obtained in cutting the composites that had coarser particles and a higher volume ratio of SiC. Moreover, it was found that the tool wear increases drastically when the SiC particles are larger than the tool grains. A wear model of the tool was proposed, in which the tool is worn mainly by the ‘tear-off’ mechanism of the diamond grains. This model could explain the experimental results by comparing the pushing force of an SiC particle with the tear-off resistance of the diamond grains of the tool. Finally, a fatigue-like empirical curve was established. This curve can be used to predict the wear of the tool during cutting of the composite. q 1997 Elsevier Science S.

Description

Keywords

Dispersion-strengthened composite; Plastic composite; Silicon carbide particle; Sintered diamond tool; Cutting; Tool wear; Tear-off mechanism

Turkish CoHE Thesis Center URL

Fields of Science

Citation

WoS Q

Scopus Q

Source

Journal WEAR

Volume

WEAR No. 206

Issue

206

Start Page

221

End Page

229