Bitkisel ve Hayvansal Üretim Bölümü

Permanent URI for this communityhttps://hdl.handle.net/20.500.12514/200

Browse

Now showing 1 - 6 of 6

Agronomic Characteristics and Yield Values of Sesame (Sesamum Indicum L.) Cultivars at Various Sowing Dates
(2023) Izgı, Mehmet Necat; İzgi, Mehmet Necat; Bulut, Burhan
In this study, ten different sesame (Sesamum indicum L.) cultivars registered in Türkiye were investigated for their sowing dates as a second crop in the lowlands of Mardin province, in 2018 and 2019. In this study, ten different sesame cultivars were used; these were Arslanbey, Boydak, Cumhuriyet-99, Hatipoğlu, Muganlı-57, Orhangazi-99, Osmanlı-99, Sarısu, Tan-99, and Tanas. Four different sowing dates (June 5, June 15, June 25, and July 4) were examined for these cultivars. In this study, agricultural parameters such as plant height, number of lateral branches, number of capsules, seed yield, oil ratio, and oil yield of the sesame cultivars were investigated. Different sowing dates were found to have a significant effect on the sesame cultivars. The second sowing date resulted in the highest plant height, number of branches, number of capsules, seed yield, oil content, and oil yield (June 15). In terms of cultivars, the Boydak and Sarısu had the highest seed yield (2184 and 2149 kg ha-1, respectively), the Osmanlı-99 (54.6%) had the highest oil ratio, and the Sarısu and Boydak had the highest oil yield (1075 and 1062 kg ha-1, respectively). The Boydak and Sarısu cultivars are promising for high seed and oil yields in the second crop sowing, and a sowing date of June 15 is advised.
Amino Acid Profile, Nutrients Content and Yield of Chickpea (Cicer Arietinum L.) Genotypes
(Scibulcom Ltd, 2015) Dogan, Y.; Doğan, Yusuf
Chickpea has significant amounts of all the essential amino acids except sulphur-containing types. It was found that chickpea is a rich source of protein and minerals. The experiments were conducted in a Randomised Complete Block Design with three replications 2013 and 2014 years in South-Eastern Turkey. A total of fifteen varieties, lines and populations were used as materials. In the study were investigated different parameters such as amino acids of protein, seed yield, protein and fat rate in seed, phosphorus, potassium, calcium, manganese, zinc, copper and iron contents and of seeds. The essential amino acid leucine (8.43 mg/100 g in 2013 and 8.59 mg/100 g in 2014) was found in highest concentration, followed by lysine (7.14 mg/100 g in 2013 and 7.27 mg/100 g in 2014) and phenylalanine (5.99 mg/100 g in 2013 and 6.07 mg/100 g in 2014) in the chickpea. Mineral composition of chickpea genotypes showed that they contribute sufficient amount of Ca, P, K, Cu, Zn and Mg in human diets to meet the recommended dietary allowance. According to the average of two years, the highest grain yield was obtained from Diyar-95 variety with 1618 kg ha(-1), the lowest grain yield was obtained from M-1 local population with 1104 kg ha(-1).
Ayvalık Tuzlasının Ağır Metal Düzeyinin Halimione Portulacoides (L.) Bitkisi Kullanılarak Belirlenmesi
(2019) Kılıç, Murat; Ay, Güngör; Koçbaş, Fatma; Kılıç, Fatma Mungan
Bu çalışmada, Ayvalık tuzlasında yayılış gösteren Halimione portulacoides (L.) Aellen bitkisi kullanılarak, tuzlanın Pb, Zn ve Cd düzeyleri Perkin Elmer Analyst 700 Model Alevli Atomik Absorbsiyon Spektrofotometresi (FAAS) cihazı kullanılarak belirlenmiştir. Tuzla İzmir-Çanakkale karayolunun bitişiğinde yer aldığından dolayı ayrıca karayoluna olan mesafeye bağlı değişimlerde belirlenmiştir. Bitkinin kök, gövde ve yaprak kısımları ile onun yetişme toprağı çalışmanın materyalini oluşturmuştur. Örneklemeler 2009-2010 yılları arasında, tuzlayı çevreleyen toprak set üzerinde belirlenen yedi istasyonda yapılmıştır. Her istasyondan 12 ay boyunca düzenli olarak numuneler alınmıştır. Yapılan tüm analizler sonucunda bitkide; Pb <0.001-0.977 ppm, Zn 0.099-1.650 ppm, Cd <0.001-0.102 ppm, toprakta ise Pb 0.523- 1.599 ppm, Zn 0.143-1.248 ppm ve Cd 0.006-0.432 ppm arasında olduğu belirlenmiştir. Pb ve Zn birikimi yola olan mesafeye bağlı artmış, Cd birikimi ile yola olan mesafe arasında ise net bir ilişki elde edilememiştir. Analizlerde sonuçların sınır değerlerin altında olmasının en önemli nedeni, hakim rüzgâr yönünün kuzeybatı (tuzladan karayoluna doğru) olması, tuzlanın güneyi boyunca uzanan karayolu üzerinde herhangi bir kavşak ve sinyalizasyonun bulunmaması ve yakınında kirletici özelliği olabilecek endüstri ve sanayi tesislerinin olmamasıdır.
Effects of Humic Acid and Phosphorus Applications on Nutrient Composition of Lentil (Lens Culinaris Medic.)
(Scibulcom Ltd., 2016) Togay, Y.; Dogan, Y.; Togay, N.; Doğan, Yusuf
Lentil (Lens culinaris Medic.) is an important food crop with high protein content. This study aimed to determine the effects of increasing doses of phosphorus and humic acid applications on P, K, Ca, Mg, Fe, Cu, Mn, Zn, protein ratio and seed yield in lentil cultivar. The study was carried out in the research and application during the 2008–2009 and 2009–2010 cropping seasons in field of Agriculture Faculty Yuzuncu Yil University, Turkey. The experiment comprised a factorial randomised complete block design replicated three times with three phosphorus treatments 0, 40 and 80 kg ha–1, as triple superphosphate, and three humic acid treatments 0, 300 and 600 kg ha–1. For basic fertilisation 40 kg ha–1 ammonium sulphate were applied for nitrogen. The nutrient contents of seed and yield were significantly increased by increasing phosphorus and humic acid levels except for Zn content nutrient. The combination between phosphorus at 80 kg P2O5 ha–1 and humic acid at 600 kg ha–1 gave the highest growth and production as well as minerals composition (P, K, Ca, Mg, Fe, Cu and Mn) and protein content compared to other treatments. Humic acid increased the availability of phosphors, macronutrients and micronutrients. © 2016, Scibulcom Ltd. All rights reserved.
Evolotion Barley Genotypes in Multi-Environment Trials by Ammi Model and Gge Biplot Analysis
(Parlar Scientific Publications (p S P), 2019) Oral, Erol; Kendal, Enver; Kilic, Hasan; Dogan, Yusuf; Doğan, Yusuf; Oral, Erol; Kendal, Enver
The uniformity of genotypes are significant for crop breeding program decisions to improve new varieties. The AMMI (Additive main effects and multiplicative interaction) analysis and Genotype x Environment Interaction (GEI) is make to estimation grain yield and understands GxE interaction patterns by researches as differential ranking of variety yields in multi-environment trials. Therefore, fifteen barley advanced line and six national cultivars and four foreign varieties (registered in abroad) were used in the study. The experiments were performed according to a complete randomized block design with four replications at five environments during two years. The stability and superiority of genotypes for yield and other traits were determined using AMMI and GGE biplot analysis. Factors (G, GE, and GEI) were found to be highly significant (P < 0.01) for grain yield. AMMI analysis indicated that the major contributions to treatment sum of squares were environments (98.52%), GE (0.45%) and genotypes (1.02%), respectively, suggesting that grain yield of genotypes were effected environmental conditions. The GGE biplot indicated that PCA 1 axes (Principal component) was significant as P<0.01 and supplied to 49.36% of complete GxE interaction. The AMMI indicated that G8 and G23 desirable and stabile genotypes for grain yield in multi-environment. Moreover, E2 and E5 (irrigated environments) were high yielding, while E3 (drought stress) low yielding as forecast. On the other hand, GGE biplot indicated that three group were occurred among traits, first group (GY: grain yield, CC: crude cellulose, CD: cold damage), second group (PC:, HVV: hectoliter weight, TGW: thousand grain weight, SH: seed humidity), third group (LOD: lodging, PH: plant height, HT: heading time). Moreover: the study showed that G3, G6, G7, G8, G13 and G21 were the best genotypes both grain yield and other traits. The results of AMMI model and GGE biplot indicated that G8 is suitable to recommend for release and G23 desirable origin for yield stability and G7 valuable source for quality to use in barley breeding program.
Identify of Macro and Trace Elements in Grain of Some Barley Varieties and Interpretation Zwith Biplot Technique
(University of Montenegro, 2021) Düzgün, M.; Kendal, E.; Zahir Düz, M.; Hatipoğlu, A.
The purpose of this study was to determine the content of some macro and trace elements in grain of spring barley cultivars, and to state the relationships between those elements. In this study macro and trace elements (Ca, K, Mg, Fe, Zn, Mn, Si, Sn, Cu, Cr, Cd, Ni, V, Pb, As and Se) of barley cultivars were determined by inductively coupled plasma optic emission spektometry (ICP-OES) using grain. The grain samples were digested by microwave system, as well as. As and Se were determined by hydride system. The result of study showed that the content Si of barley cultivars are quite high, however, the concentrations toxic heavy metals of Cd, Pb and as were determined to be below the limit values. The biplot indicated that three group occurred among macro and trace element and the correlation of Zn with Sn, Cr with Ca and Fe, Ca with Fe and Pb was significant and positively, while V with Si was significant and negatively. On the other hand, the study showed that Samyeli is the best cultivar based on macro and trace element concentrations and this variety can be used in animal husbandry. © 2021, University of Montenegro. All rights reserved.

Browse

Browsing Bitkisel ve Hayvansal Üretim Bölümü by WoS Q "N/A"